Skip to main content

Samsung displays (Tizen)

Samsung commercial displays run the InfoBox Tizen app natively, with no stick needed. How to install it from one web address, connect the screen, and what to know about Samsung screens.

4 min readLast updated: 2026-11-17

Introduction

Samsung commercial displays run Tizen, not Android. InfoBox has its own app for them, the InfoBox Tizen app, so you don't need an InfoBox Basic stick or another Android device. Once the app is installed, you connect the screen and publish content exactly as with an Android screen.

What you need

Check these first:

  • A Samsung commercial (signage) display with Tizen 4.0 or newer, for example the QB or QM series. Consumer Samsung TVs are not supported.
  • The display's latest firmware. Older firmware can refuse to install the app: update it first from the display's support menu (Software Update).
  • A network connection for the display (wired or WiFi).
  • A screen in your InfoBox organization that isn't connected to a device yet.

Step 1: Install the app

On the display, with the remote control:

  • Open the display's URL Launcher settings and choose Install Web App.
  • Enter the address https://api.app.infoboxi.com/api/v1/tizen/install and confirm. The display downloads and installs the InfoBox app.
  • In the display's system menu, set Play via to URL Launcher, so the display starts InfoBox every time it is switched on.

Step 2: Connect the screen

When the app starts, the display shows "Connect this screen" and a Device ID that starts with tizen-:

  • Sign in at app.infoboxi.com and open All screens.
  • On the screen you want to use, click "Connect".
  • Under "Which device goes on this screen?", choose Samsung (Tizen) and type the Device ID shown on the display.
  • The display changes to "This screen is connected". Publish content and it appears within seconds. See Connect Device and Device ID explained.

App updates

InfoBox updates the app on Samsung screens for you, remotely. The display installs the new version in about a minute without a restart, and the content comes back on its own. Samsung displays don't use the update window.

Recommended display settings

Set these in the display's own menu:

  • The right time zone and clock. Schedules use the display's own clock, so a wrong time zone shifts them.
  • Don't switch the display off remotely over MDC. In standby the display drops its network connection and can't be woken up again remotely. Use the InfoBox power schedule in Watchdog instead.

Good to know

Content, playlists, scheduling and publishing work as on other screens. In addition:

  • Remote restart, screenshots and the power schedule work in Watchdog as on Android screens.
  • Synchronized playback works on Samsung screens too, also together with Android screens.
  • Websites that don't allow being shown inside another page (for example many large services such as Google) can't be shown on a Samsung screen. The screen skips them and shows the rest of the playlist. On Android screens they show normally.
  • YouTube and Power BI content doesn't play on displays with Tizen 4.0.
  • Forced output size isn't available on Samsung screens yet.

Summary

Install the InfoBox app from the display's URL Launcher settings with the address https://api.app.infoboxi.com/api/v1/tizen/install, set Play via to URL Launcher, and connect the screen with its tizen- Device ID. After that, updates arrive remotely.